Skip to content 
Laser cutting machines have the advantages of high -efficiency, high quality, high precision, intelligence, etc., and have a wide range of use in sheet metal processing, but there will also be problems in the process of application. In particular, customers do not have professional laser cutting engineers. The occurrence of the problem will affect the normal operation of the machine and the quality of cutting carbon steel. So what problems will be encountered during the operation, let’s take a look below.
(1) Reasons and solutions for carbon steel not cut through:
1.The choice of laser nozzle does not match the thickness of the plate, replace the nozzle or plate;
2.Laser cutting line speed is too fast, need to operate the control to reduce the line speed.
(2) Reasons and solutions for burrs when cutting carbon steel:
1.Laser focus position offset, do focus position test, according to the laser focus offset amount to adjust;
2.Laser output power is not enough, you need to check whether the laser generator is working properly, if normal, then observe the laser control button output value is correct, if not correct to adjust.
3.Cutting line speed is too slow, you need to increase the line speed in the operation control.
4.Cutting gas purity is not enough, need to provide high-quality cutting gas;
5 Machine running time is too long instability, this time you need to shut down and restart.
