Skip to content 
Laser cutting machine is combined by high -precision components. In order to ensure its normal use, daily maintenance and maintenance of the equipment must be performed. Regular professional operations can effectively reduce the impact of the environment on each component. High, non -fault -free long -term stable operation.
Laser cutting machines have high degree of flexibility, fast cutting speed, high production efficiency, short product production cycle, and won a wide market for customers. Laser cutting technology has been widely used in automotive, machinery, power, hardware, and electrical appliances.
So, what are the maintenance and maintenance precautions of the five key parts of the metal laser cutting machine? QY Laser Technology Engineers analyze and answer for you.
Precautions for maintenance and maintenance of the five key parts of laser cutting machine:
The main components of laser cutting machine equipment are circuit systems, transmission systems, cooling systems, optical systems, and dust removal systems.
1. Maintenance and maintenance of optical system:
Laser cutting machine accessories (protective mirrors, focus mirrors, etc.) surface, do not touch it directly with your hands, which can easily cause mirror scratches. If there is oil or dust on the mirror, it will seriously affect the use of the lens, and the lens should be cleaned in time. Different lens cleaning methods are different; reflex mirror cleaning of laser cutting machine accessories: blow off the dust on the surface of the lens with a spray gun; clean the surface of the lens with alcohol or lens paper.
Cleaning mirror of metal laser cutting machine accessories: first use the spray gun to blow off the dust on the mirror; then remove the dirt with a clean cotton swab; use a new cotton swab with high purity alcohol or acetone, move from the lens center to the circle around the circle, scrub the lens to scrub the lens from the lens, and scrub the lens. After a week after rubbing, change to another clean cotton swab and repeat the above operation until the lens is clean.
2. Maintenance and maintenance of the transmission system:
After a period of time, the direct -wire motor rail of the laser cutting machine will cause smoke and dust to have corrosion effects on the guide rail. The cycle is half a year.
Maintenance method: Plug off the laser cutting mechanism, open the wind cover to wipe the guide rail with a clean soft cloth, and then apply a thin layer of white guide lubricating oil on the guide track. Make sure that lubricating oil enters the inside of the slider. Remember not to directly contact the guide rail with your hands, otherwise the rust of the guide rail will affect the operation.
3. Maintenance and maintenance of the circuit system:
The electrical appliances on both sides of the laser cutting machine and the tail chassis should be kept clean. After a period of time, the power is checked. When the air compressor is vacuum, the dust accumulation is too much. The dry weather will generate static electricity and interfere with the signal transmission of the machine. The weather is humid and the circuit will have short circuit problems, causing the machine to operate normally. The machine needs to run at the designated environmental temperature to operate production.
When the maintenance work is performed, the device must be closed through the main switch, which close it and removes the key. It is necessary to strictly abide by safety regulations in order to avoid accidents. Because the entire equipment is combined with high precision components, it is necessary to be extra careful during the daily maintenance process, strictly follow the operating procedures of each part, and maintain it by special personnel, not barbaric operations to avoid damaging components.
The environment of the workshop should be dry and ventilated. The ambient temperature is 25 ° C ± 2 ° C. In summer, pay attention to preventing equipment exposure, and prevent freezing the laser equipment in winter. The equipment should be away from electrical equipment that is sensitive to electromagnetic interference to prevent the equipment from being disturbed by electromagnetic for a long time. Far away from the large amount of large -power and strong vibration equipment, the large amount of large power interference, the amount of large power interference sometimes causes the machine to fail. Although it is rare, it should be avoided as much as possible.
4. Maintenance and maintenance of the dust removal system:
After a period of working for a period of time for the metal laser cutting machine, a large amount of dust will be accumulated in the fan and exhaust pipes. The dust will affect the exhaust efficiency of the fan, causing a large amount of smoke and dust to be discharged. Clean every month, loosen the connection of the exhaust pipe and fan, remove the exhaust pipes, and clean up the dust in the exhaust pipe and the fan.
5. The maintenance and maintenance of the cooling system:
The main function of the cold water machine of the laser cutting machine is cooling laser. Cold water circulating water requires that distilled water must be used. There is a problem with the problem of water quality or the dust soil in the environment entering circulating water. The cutting effect even burns optical elements, so good and regular maintenance is the key to ensuring the normal work of the machine.
Maintenance method: Remove the dirt on the surface of the cold water machine with a cleaning agent or high -quality soap. Do not use benzene, acid, grinding, steel brush, hot water, etc. Compressed air or hair brushes to remove the dust of the condenser; replace circulating water (distilled water), and clean the water tank and metal filter.
The above is the analysis of the maintenance and maintenance precautions of the five key parts of the metal laser cutting machine. The main products of QY Laser are laser cutting machine, laser cleaning machine, laser welding machine, bending machine, etc. Used in machinery manufacturing, elevator, sheet metal, kitchen equipment, chassis cabinet, machine tool equipment, electrical equipment, lighting hardware, advertising signs, auto parts, display equipment, all kinds of metal products, sheet metal cutting processing and other industries.
