Solutions for low production efficiency of fiber laser cutting machines

The reason why the fiber laser cutting machine is widely respected in the metal processing industry is mainly its high production efficiency and the advantages of labor costs. However, many customers have used it for a period of time, and found that the production efficiency has not been much improved, what is the reason for this? Here are the reasons for the low production efficiency of fiber laser cutting machine.

1, no automatic cutting process

The fiber laser cutting machine has no automatic cutting process and cutting parameter database on the system. Cutting operators can only rely on experience to manually perform drawing cutting, cutting can not be automatic perforation and automatic cutting, manual adjustment is required, in the long run, the efficiency of fiber laser cutting machine is naturally low.

2, the use of cutting method is not suitable

No proper cutting method was used when cutting sheet metal. In this way, the cutting path is long, the cutting time is long, the production efficiency is very low, and the consumption of consumables will also increase, and the cost is high.

3. No nesting software is used

The nesting software is not used when typesetting and cutting, but it is manually typesetting in the system and cutting according to the sequence of parts. This will result in a large number of scraps after cutting the plate, low utilization rate of the plate, and the cutting path is not optimized, long cutting time and low production efficiency.

4. The cutting power does not match the actual cutting thickness

The corresponding fiber laser cutting machine is not selected according to the actual cutting requirements. For example, it is actually necessary to cut 16mm carbon steel plate in large quantities, and to buy a 3000W power cutting equipment, the equipment can indeed cut 16mm carbon steel plate, but the cutting speed is low, and the long-term cutting will lead to the damage rate of the lens, and even affect the focusing lens.

The above is the reason for the low efficiency of the common fiber laser cutting machine and its solution. A good laser cutting machine is an important condition for efficient production, and the protective maintenance of the laser cutting machine should also be done, which must not be ignored.